EasyManuals Logo

ELTEX ESR Series User Manual

ELTEX ESR Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #433 background imageLoading...
Page #433 background image
ESR-Series. User manual
433
Step Description Command Keys
5 Create IP addresses lists which will be
used during filtration.
esr (config)# object-group network
<WORD>
esr (config-object-group-
network)# ip prefix <ADDR/LEN>
<WORD> – server name, set by
the string of up to 32
characters.
<ADDR/LEN> – subnet, defined
as AAA.BBB.CCC.DDD/EE
where each part AAA-DDD
takes values of [0..255] and EE
takes values of [1..32].
6 Specify the IP address profile that IPS/
IDS will protect.
esr(config-ips-policy)# protect
network-group <OBJ-GROUP-
NETWORK_NAME>
<OBJ-GROUP-NETWORK-
NAME> – protected IP
addresses profile name, set by
the string of up to 32
characters.
7 Specify the profile of IP addresses that
are external for IPS/IDS (optionally).
esr(config-ips-policy)# external
network-group <OBJ-GROUP-
NETWORK_NAME>
<OBJ-GROUP-NETWORK-
NAME> – external IP addresses
profile name, set by the string
of up to 32 characters.
8 Create a content filter category profile esr(config)# object-group content-
filter <NAME>
<NAME> – name of the content
filtering profile, specified as a
string of up to 31 characters.
9 Set the description of the content filter
categories profile (optional).
esr(config-object-group-content-
filter)# description
<DESCRIPTION>
<DESCRIPTION> – description,
set by the string of up to 255
characters.
10 Set the content filtering category
provider.
esr(config-object-group-content-
filter)# vendor <CONTENT-FILTER-
VENDOR>
<CONTENT-FILTER-VENDOR>–
name of the content filtering
category provider. In the
current version of the software,
only Kaspersky Lab can act as
a content filtering category
provider.
11 Set the necessary categories of content
filtering
esr(config-object-group-cf-
kaspersky)# category
<CATEGORY>
<CATEGORY> – category
name. A description of the
available categories can be
found in the CLI command
reference.
12 Switch to the IPS/IDS configuration
mode.
esr(config)# security ips
13 Assign IPS/IDS security policy. esr(config-ips)# policy <NAME> <NAME> – security policy
name, set by the string of up to
32 characters.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX ESR Series and is the answer not in the manual?

ELTEX ESR Series Specifications

General IconGeneral
ModelESR Series
CategoryNetwork Router
ManufacturerELTEX
ManagementWeb interface, CLI, SNMP
Operating Temperature0°C to 40°C
DimensionsVaries by model
WeightVaries by model
Routing ProtocolsOSPF, BGP
WAN InterfacesEthernet, SFP
LAN InterfacesEthernet, SFP
VPN SupportIPsec, L2TP, PPTP
FirewallStateful packet inspection, ACLs
Power over Ethernet (PoE)Available on some models
QoSTraffic prioritization

Related product manuals