ELTEX ESR Series User Manual

ESR-Series. User manual
477
•
•
•
Accounts for connection – tester;
Account passwords – password;
The connection should be established from the gigabitethernet 1/0/7 interface.
Solution:
Pre-configure PPPoE server with the accounts.
Enter the PPPoE client configuration mode and disable the firewall:
esr# configure
esr(config)# tunnel pppoe 1
esr(config-pppoe)# ip firewall disable
Specify user name and password for connection to PPPoE server:
esr(config-pppoe)# username tester password ascii-text password

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization