ELTEX ESR Series - Page 74

ESR-Series. User manual
74
•
•
•
Interface type Designation
Physical interfaces Designation of physical interface includes its type and identifier.
The identifier of physical interfaces is as follows: <UNIT>/<SLOT>/
<PORT>, where
<UNIT> – number of a device in a device group,
<SLOT> – device module number or '0' if the device does
not consist of modules,
<PORT> – port sequence number.
1Gbps ports gigabitethernet <UNIT>/<SLOT>/<PORT>
Designation example: gigabitethernet 1/0/12
10Gbps ports tengigabitethernet <UNIT>/<SLOT>/<PORT>
Designation example: tengigabitethernet 1/0/2
40Gbps ports fortygigabitethernet <UNIT>/<SLOT>/<PORT>
Designation example: fortygigabitethernet 1/0/2
Channel aggregation groups Designation of channel aggregation group includes its type and
identifier:
port-channel <CHANNEL_ID>
Designation example: port-channel 6
It is permitted to use short name, for example, gi1/0/12.

It is permitted to use short name, for example, te1/0/2.

It is permitted to use short name, for example, fo1/0/2.

It is permitted to use short name, for example, po1.
