EasyManua.ls Logo

Epson AcuLaser C1100 - Page 127

Epson AcuLaser C1100
565 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING FIP according to the printer message 127
OTHER ERRORS AND WARNINGS
Table 3-2. List of Errors and Warnings
Class Panel Message Error LED Description See FIP
Warning
Y Toner Low --- The toner supply time of the Yellow toner cartridge has reached the preset time. The printer, however, can be operated.
72 (p.231)
M Toner Low --- The toner supply time of the Magenta toner cartridge has reached the preset time. The printer, however, can be operated.
73 (p.232)
C Toner Low --- The toner supply time of the Cyan toner cartridge has reached the preset time. The printer, however, can be operated.
74 (p.233)
K Toner Low --- The toner supply time of the Black toner cartridge has reached the preset time. The printer, however, can be operated.
75 (p.234)
Worn Photoconductor --- SENSOR TNER FULL of the Waste Toner Box has detected a toner full state. The printer, however, can operated.
76 (p.235)
--- The number of drum rotations has exceeded the specified value. The printer, however, can be operated.
77 (p.236)
Error
Install Y TnrCart ON The Yellow toner cartridge is not mounted.
1 (p.134)
Install M TnrCart ON The Magenta toner cartridge is not mounted.
2 (p.135)
Install C TnrCart ON The Cyan toner cartridge is not mounted.
3 (p.136)
Install K TnrCart ON The Black toner cartridge is not mounted.
4 (p.137)
Install Photocondctr ON The photoconductor unit is not mounted.
5 (p.138)
Photocondctr Trouble ON A communication error occurred between PWBA MCU and ANTENNA ASSY (CRUM XERO).
6 (p.139)
An error occurred when writing data to ANTENNA ASSY (CRUM XERO).
7 (p.140)
A photoconductor unit with a memory of different specification device is attached.
8 (p.141)
Wrong Photocondctr ON A drum cartridge of a different specification is attached.
9 (p.142)
TonerCart Error Y ON A communication error occurred between PWBA MCU and ANTENNA CTRG (CRUM CTRIG).
10 (p.143)
An error occurred when writing data to ANTENNA CTRG (CRUM CTRIG).
11 (p.144)
A Yellow toner cartridge with a memory of different specification device is attached.
12 (p.145)
Wrong Toner Y ON A Yellow toner cartridge of a different specification is attached.
13 (p.146)

Table of Contents

Other manuals for Epson AcuLaser C1100

Related product manuals