Laser Beam
W A R N I N G
Letting a laser beam get into your eye directly could result in
loss of vision.
Never open the Cover where the Warning Label About Laser
Beam is affixed.
Before disassembling or assembling, be sure to turn the power
off.
If you need to work on the printer with power applied, strictly
follow the instructions in this manual.
Understand hazardous nature of the laser beam, use extreme
caution to avoid injury of yourself and anyone around you.
C H E C K
P O I N T
The laser beam has a narrower frequency band and more
coherent phases than any other light (sunlight, electric light).
The beam has excellent monochromaticity and convergence,
thus it reaches long distances. Because of these characteristics,
the laser beam converges into one point, causing high density
and high temperature. And that is why a laser beam is harmful
to the human body.
The laser beam in this printer is invisible.
Leg_Sec001_003EB
Caution Label
(Refer to “Caution Label About High-temperature Surface”)
ROS ASSY
To Next Page
Loading...
Need help?
General
Weight and Dimensions
