Warning/Caution Labels
Warning labels and caution labels are attached on the corresponding locations on or in
the printer.
Caution Label About High-temperature Surface
The labels are attached on the Fuser assy and the perimeter alerting the user to
avoid burn injury.
(Refer to “High Temperature Assembly”)
Warning label for Laser Beam
The label is attached on the top of the laser beam emitting unit (ROS ASSY) to
alert the service personnel the danger of laser beam.
C H E C K
P O I N T
In maintenance work, check that the labels are free from peeling
and soiling.
Leg_Sec001_018EA
Leg_Sec001_019EA
Leg_Sec001_020EA
Leg_Sec001_023EA
To Next Page
Loading...
