Epson AcuLaser C1100 - Service Conditions; Ambient Temperature and Humidity; Air Pressure (Altitude); Levelness

EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Service Conditions 34
1.5 Service Conditions
1.5.1 Ambient Temperature and Humidity
1.5.2 Air Pressure (Altitude)
65 to 101kPa (0 to 3, 100m or less)
1.5.3 Levelness
Difference between front and back: 5mm or less (at 445mm)
Difference between left and right: 10mm or less (at 445mm)
1.5.4 Illumination
3, 000 lx or less (do not expose to direct sunlight)
1.5.5 Space Requirements
In order to ensure that the printer operates properly, provide at least as much space as
shown in the diagram below.
Figure 1-7. Space Requirements
Table 1-21.
Temperature (ºC) Humidity (%RH) Other
Operating 5 to 32 15 to 85
No condensation
Non-operating -20 to 40 5 to 85
700mm
100mm
870mm
280mm
(165)mm
1190mm
400mm
830mm
300mm