Epson AcuLaser C1100 - Cover Front L, Cover Front Assy U

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY COVER 292
4.2.10 COVER FRONT L, COVER FRONT ASSY U
REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove COVER ASSY LH. (p.295)
3. Remove COVER MSI. (p.291)
4. Remove the 3 screws (silver, with flange, 8 mm) fastening COVER FRONT L to
the main unit.
5. Slide COVER FRONT L to the right, unhook the two hooks on the rear of COVER
FRONT L from the holes on the main unit, and remove COVER FRONT L
together with COVER FRONT ASSY U.
6. Press the bosses on the left and right of COVER FRONT ASSY U by inserting a
screwdriver, and draw out from the holes on COVER FRONT L to remove
COVER FRONT ASSY U from COVER FRONT L.
Figure 4-12. Removal of COVER FRONT L and COVER FRONT ASSY U (1)
Figure 4-13. Removal of COVER FRONT L and COVER FRONT ASSY U (2)
C A U T I O N
When performing the following work, take care not to damage the
COVER FRONT ASSY U boss.
Leg_Sec03_009EB
4)
5)-1
4)
4)
5)-2
Leg_Sec03_010EB
6)-2
6)-1