Epson AcuLaser C1100 - Page 293

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY COVER 293
REINSTALLATION
1. Match the boss on COVER FRONT ASSY U with the holes on COVER FRONT
L while bending down COVER FRONT ASSY U, and attach COVER FRONT
ASSY U to COVER FRONT L.
2. Match the two hooks on the rear of COVER FRONT L with the holes on the main
unit, and attach COVER FRONT L together with COVER FRONT ASSY U.
3. Fasten COVER FRONT L to the main unit with the 3 screws (silver, with flange, 8
mm).
4. Attach COVER MSI. (p.291)
5. Attach COVER ASSY LH. (p.295)
6. Attach COVER ASSY RH. (p.301)
C A U T I O N
When performing the following work, take care not to damage the
COVER FRONT ASSY U boss.