Epson AcuLaser C1100 - Cover Inner Top

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY COVER 299
4.2.15 COVER INNER TOP
REMOVAL
1. Remove OP PANEL. (p.294)
2. Remove the 2 screws (silver, with flange, 6 mm) fastening COVER INNER TOP
to the main unit.
3. Remove COVER INNER TOP from the main unit.
REINSTALLATION
1. Match the hole on COVER INNER TOP with the boss on the main unit.
2. Fasten COVER INNER TOP to the main unit with the 2 screws (silver, with
flange, 6 mm).
3. Attach OP PANEL. (p.294)
Figure 4-18. Removal of COVER INNER TOP
Leg_Sec03_187EB
3)
2)
2)