Epson AcuLaser C1100 - Solenoid Feed

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 459
4.13.13 SOLENOID FEED
REMOVAL
1. Remove COVER LEFT 500. (p.453)
2. Remove CLUTCH ASSY FEED. (p.461)
3. Remove DRIVE ASSY FEED. (p.458)
4. Remove the screw (silver, 6 mm) fastening SOLENOID FEED to DRIVE ASSY
FEED.
5. Remove SOLENOID FEED from DRIVE ASSY FEED.
REINSTALLATION
1. Match the hole on SOLENOID FEED with the boss on DRIVE ASSY FEED.
2. Fasten SOLENOID FEED to DRIVE ASSY FEED with the screw (silver, 6 mm).
3. Attach DRIVE ASSY FEED. (p.458)
4. Attach CLUTCH ASSY FEED. (p.461)
5. Attach COVER LEFT 500. (p.453)
Figure 4-159. Removal of SOLENOID FEED
Leg_Sec03_024FA
4)
5)