Epson AcuLaser C1100 - Conditions for Storage and Transport; Ambient Temperature and Humidity; Storage Altitude; Dropping

EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Conditions for Storage and Transport 35
1.6 Conditions for Storage and Transport
1.6.1 Ambient Temperature and Humidity
Note *1: Non-condensing
1.6.2 Storage Altitude
0 to 3, 100 m or less
For air transport, 0 to 15, 000 m. However, this assumes that the cargo compartment is
maintained at 70.9275 kPa or higher.
1.6.3 Dropping
There should be no damage on 1 corner, 3 edges, and 6 sides of the packages under the
conditions below.
1.6.4 Vibration
There should be no damage under the following conditions
 Frequency : 5 to 55 Hz
 Acceleration : 1.5 G
However, between 5 to 10 Hz, constant 7.5 mm
double amplitude is assumed.
 Frequency sweep : Logarithmic sweep 10 minutes for one-way
 Direction of application : X, Y, Z directions
 Number of cycles : 3 cycles for each of XYZ directions (each 1 hour)
Table 1-22.
Condition Temperature (°C) Humidity*
1
(%RH) Guarantee period
Normal
conditions
0 to 35 15 to 80
12 months after
manufacture
Harsh
conditions
High 35 to 40 High 80 to 95
Max. 48 hours
Low -20 to 0 Low 5 to 15
Table 1-23.
Drop
Standard Main unit 610mm
Option
500-sheet cassette unit 760mm
Duplex unit 910mm