Epson AcuLaser C1100 - Oil Damper

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY MSI 317
4.3.9 OIL DAMPER
REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove COVER ASSY LH. (p.295)
3. Remove COVER MSI. (p.291)
4. Remove COVER FRONT L and COVER FRONT ASSY U. (p.292)
5. Remove FRAME ASSY-PH. (p.327)
6. Remove MSI ASSY. (p.304)
7. Unhook the hook on GEAR PICK UP fastened to SHAFT ASSY MSI from MSI
ASSY, and remove GEAR PICK UP.
8. Remove the 2 screws (silver, with flange, tapping, 8 mm) fastening DAMPER
BRACKET to the MSI ASSY.
9. Remove OIL DAMPER together with DAMPER BRACKET from MSI ASSY.
10. Remove OIL DAMPER from DAMPER BRACKET.
Figure 4-35. Removal of OIL DAMPER
Leg_Sec03_200FA
7)-1
7)-2
9)
8)
8)
10)