Epson AcuLaser C1100 - Chute Assy-Inv Low

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY DUPLEX 427
4.12.12 CHUTE ASSY-INV LOW
REMOVAL
1. Remove DUPLEX ASSY. (p.412)
2. Remove the 2 screws (silver, with flange, tapping, 10mm) CHUTE ASSY-INV
LOW to DUPLEX ASSY.
3. Remove CHUTE ASSY-INV LOW from DUPLEX ASSY.
REINSTALLATION
1. Match the hole on CHUTE ASSY-INV LOW with the boss on DUPLEX ASSY,
and attach CHUTE ASSY-INV LOW.
2. Fasten CHUTE ASSY-INV LOW to DUPLEX ASSY with the 2 screws (silver,
with flange, tapping, 10mm).
3. Attach DUPLEX ASSY. (p.412)
Figure 4-127. Removal of CHUTE ASSY-INV LOW
Leg_Sec03_127FA
2)
3)
2)