EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING FIP according to the printer message 164
21
Continuity check of HARNESS-ASSY P/H2
Disconnect P/J603.
Do all of the wiring below have normal
continuity?
P603-1 ↔ P202-2
P603-2 ↔ P202-1
Go to Step [22]. Replace
HARNESS-
ASSY P/H2.
22
Check of resistance value of CLUTCH
ASSY PRE REGI
Disconnect P/J202.
The winding resistance between the terminals
of CLUTCH ASSY PRE REGI is 144Ω ±
10% (20°C)?
Go to Step [18]. Replace
CLUTCH
ASSY PRE
REGI. (p.338)
Step Check Yes No
To Next Page
Loading...
