Epson AcuLaser C1100 - Page 501

EPSON AcuLaser C1100 Revision B
MAINTENANCE Sheet for Servicing 501
 Paper size:
Indicated same as the panel display.
 Paper type:
Indicated as the specified value set for each media to control the engine.
Note *1: The date and time are indicated in the local time when generated. (yy/mm/dd hh:mm
(The date and time is not re-calculated even if the time difference is changed.)) yy
are the lower two digits of the calendar year.
In the non-synchronous mode, “--/--/-- --:--” is displayed.
*2: The value of the total dot counter on ASIC is used in the dot calculation. Threshold is
128.
Figure 6-3. Engine Status Sheet
Table 6-2. Paper type
Paper type Front side Back side
Plain paper 9 25
High quality paper 8 24
Thick paper 4 20
Extra thick paper 10 26
Coated paper 7 23
Transparency 2 ---
Labels 5 ---
Envelopes 15 ---
Postcards 14 30