EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 101
Confidential
Main Motor + Gear Unit
1. Disconnect the connector from the Main Motor.
2. Remove the five screws, and remove the Main Motor and the Gear Unit.
A) Silver / M3x6 / P-Tite: Three pieces
B) Silver / M3x6 / S-Tite: Two pieces
Never turn the Main Motor in the reverse direction of the arrow indicated on the Main
Motor Board. Doing so may damage the Photoconductor Unit.
A3 B3
C3 D3
A
A
A
B
B
Connector
Gear Unit
Gear Box
1. Disconnect the three connectors from the Main Board Assy.
2. Release the cables from the two cable retainers.
3. Remove the three screws.
A) Silver / M3x10 / P-Tite: One piece
B) Silver / M3x6 / S-Tite: Two pieces
4. Remove the Gear Box.
A4 B4
C4 D4
Cable Retainers
A
B
B
Gear Box
Connector
(YC809)
Connector
(YC808)
Connector
(YC818)