EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
ADJUSTMENT Adjustment Item 141
Confidential
5.1 Adjustment Item
The table below shows the adjustment item (including life counter clear) required when the specified part/unit is fixed or replaced.
Part/Unit Timing Item Adjustment Procedure Required Jig & Tool Reference
Main Board Assy. After replaced
with a new one
Writing of USB-ID Execute the item using the dedicated program. EPSON Page Printer Main Board
Initialization Tool
Page 142
As needed Updating of controller
firmware
Execute the item using the dedicated program. Firmware Update Tool
Page 145
As needed Updating of engine controller
firmware
Execute the item using the dedicated program. Firmware Update Tool