Epson AcuLaser M2000D User Manual

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
PRODUCT DESCRIPTION Product Specifications 12
Confidential
1.1.4 Controller Specifications
BASIC SPECIFICATIONS
EXTERNAL INTERFACES
Figure 1-6. External Interfaces
CPU VR5500 (300MHz)
Enhanced Technology RIT (NICE)
RAM Standard (on-board) Standard model: 32MB
Network model: 64MB
Maximum Standard model: 288MB
Network model: 320MB
Expansion Type SDRAM 90pin DIMM
(64MB, 128MB, 256MB)
Numbers of slot 1 slot
ROM Type 16-bit width (3.3V)
Program 16MB
Font Included in the program
EEPROM Serial type 128Kbit
Control panel Three buttons and six LEDs. No LCD
Printer language ESC/Page (B/W), FX, ESC2, I239X, PCL5e, PCL6,
Adobe PostScript3 and PDF1.3
Auxiliary software
 Status Sheet printing
 EpsonNetConfig (Web) (Network model only)
 USB Ext I/F Status Sheet
 Network Status Sheet printing (Network model
only)
 PS3 Status Sheet printing
 PS3 Font List printing
 PCL Font Sample printing
 Hex dump
 MAINTENANCE MODE (only for Engine Status
Sheet and Print Log Report)
Standard model USB
2.0 HS
Parallel
IEEE1284 compliant
Network model USB
2.0 HS
Network 100BaseTX/10BaseT
[Standard model]
[Network model]
USB
Parallel
Network
USB

Epson AcuLaser M2000D Specifications

General

Brand	Epson
Model	AcuLaser M2000D
Category	Printer
Language	English