Epson AcuLaser M2000D - Page 158

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
ADJUSTMENT Adjustment 149
Confidential
8 Confirm the checksum.
When updating the program data is finished, the checksum will be indicated on the LCD panel.
Confirm the checksum.
9
Reboot the Printer. Turn the printer off and back on.
10
Print the status sheet. Prints the status sheet.
11
Check the version on the status sheet. Check the firmware version printed on the status sheet or engine status sheet and confirm that the firmware is updated.
Procedure Method