Epson AcuLaser M2000D - Page 73

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
TROUBLESHOOTING Troubleshooting 64
Confidential
Paper becomes
wrinkled,
creased, or
curled.
Lower the fusing pressure using the following procedure.
1. Remove the paper cassette.
2. Open the duplex cover.
3. Slide both left and right fuser levers inward.
Lowering the fusing pressure may cause degradation in toner
fixity.
Problem Possible cause Remedy
Right Fuser Lever
Duplex Cover
Left Fuser Lever
Paper becomes
wrinkled,
creased, or
curled.
Problem Possible cause Remedy
Normal
Fusing pressure
is lowered
Left (Right)
Fuser Lever
Left (Right)
Fuser Lever