Fluke DSX-8000 - Page 299

Chapter 9: Certify Fiber Cabling
Autotest in Smart Remote Mode
263
GPU122.EPS
Figure 111. Connections for Smart Remote Mode
(1 Jumper Reference, Multimode Fiber)
WCaution
Do not disconnect the
outputs ( and ) after
you set the reference.
When you use the EF-TRCs,
DO NOT use other
mandrels.
Fiber
link
Test
reference
cord
Test
reference
cord
*Use the EF-TRCs only with multimode modules.
Fiber Link Test
Reference
TRC Verification