Fujitsu Eternus web GUI - Page 120

Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
120
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
4 Click the [OK] button.
→ RAID group creation starts.
5 Click the [Done] button to return to the [RAID Group] screen.
End of procedure
■ Manually selecting drives to create RAID groups
Procedure
1 Click [Create] in [Action].
2 Select "Manual" for "Create Mode".
3 Specify the RAID group detailed information, and click the [Create] button.
• Name
Input a RAID group name that is to be created.
An existing RAID group name cannot be used.
The following input conditions apply:
- 1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space