Fujitsu Eternus web GUI - Page 180

Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
180
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• Source Volume No.
The following is displayed depending on the "Direction". If the status is "Reserve", a "-"
(hyphen) is displayed.
- When the "Direction" is "From Local/To Remote"
The copy source volume number is displayed.
- When the "Direction" is "From Remote/To Local"
"Remote Box ID/Copy Source Volume No." is displayed.
• Destination Volume No.
The following is displayed depending on the "Direction". If the status is "Reserve", a "-"
(hyphen) is displayed.
- When the "Direction" is "From Local/To Remote"
"Remote" is displayed.
- When the "Direction" is "From Remote/To Local"
The copy destination volume number is displayed.
• Remote Session ID
The session ID for the remote device is displayed.
• Type
The copy session type is displayed using an abbreviation (REC).
• Status
The copy session status is displayed.
- Active
Operating normally
- Reserve
Session ID reserved
- Suspend
Suspended by an instruction from the host
- Halt
Remote copy disabled due to an error
- Error Suspend
Copy canceled due to an error
• Phase
The copy session phase is displayed. If the status is "Reserve", a "-" (hyphen) is displayed.
- Copying
Copying
- Equivalent
Maintaining equivalent status of the copy source and copy destination that are duplicated
after copy is complete
- No Pair
No pair of duplicated copy source and copy destination is set
• Error Code
The error code is displayed when an error occurs. If the status is "Reserve", a "-" (hyphen) is
displayed.
• Direction
The copy direction of the applicable session is displayed. If the status is "Reserve", a "-"
(hyphen) is displayed.