Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
181
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
- From Local/To Remote
Session from the local device (copy source) to the remote device (copy destination)
- From Remote/To Local
Session from the remote device (copy source) to the local device (copy destination)
• Time Stamp
The time when backup is complete and the time when an error occurred are displayed. If the
status is "Reserve", a "-" (hyphen) is displayed.
- When the "Status" is "Suspend", the previous backup time is displayed.
- When the "Status" is "Error" or "Halt", the time when an error occurred is displayed.
- When the "Status" changes from "Halt" to "Active" or a session in "Halt" status is forcibly
suspended, the time stamp is initialized.
• Elapsed Time
The elapsed time after a session starts is displayed. If the status is "Reserve", a "-" (hyphen)
is displayed.
• Copied Data Size
The size of copy that has been complete is displayed. If the status is "Reserve", a "-" (hyphen)
is displayed.
• Total Data Size
The total copy size is displayed. If the status is "Reserve", a "-" (hyphen) is displayed.
• Resolution
The copy session resolution is displayed. If the status is "Reserve", a "-" (hyphen) is
displayed.
• Client Information
The information of the client that started the copy session is displayed. If the status is
"Reserve", a "-" (hyphen) is displayed.
- SCSI
Copy session requested by the copy management software (via SCSI).
- LAN
Copy session requested by the copy management software (via LAN).
- GUI
Copy session requested by GUI.
- CLI
Copy session requested by CLI.
- SMI-S
Copy session requested by SMI-S.
• License
The registration status of the Advanced Copy license when the copy session is started is
displayed.
- Regular
The copy session is started with a paid license.
- Trial
The copy session is started with a trial license. Copy sessions that use a trial license are
deleted automatically after the expiration of the trial license.