Fujitsu Eternus web GUI - Page 234

Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
234
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
Copy Path Information File Selection
In this screen, select the copy path information file to be used.
Procedure
1 Enter the location where the copy path information file to be used is stored, and
click the [Next] button.
• Copy Path Information File
Enter the location where the copy path information file is stored.
Click the [Browse...] button and specify the location, or directly input the path.
→ The [Device Connection List] screen appears. Proceed to "Apply Copy Path
Information" (page 235).
End of procedure
Perform this procedure only when "Apply Copy Path" is selected in the pro-
cedure in "Operation Method Selection" (page 227)
.