Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
306
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Click the [OK] button.
→ Registration of the iSCSI host group starts.
An error screen appears in the following conditions:
• When the "Host Group Name" does not satisfy the input
conditions
• When the "Host Group Name" has not been specified
• When the "IP Address" does not satisfy the input conditions
• When the "IP Address" is not Class A, B, or C
• When the "Alias Name" does not satisfy the input conditions
• When the "Alias Name" overlaps the existing Alias name
• When the "CHAP User ID" does not satisfy the input conditions
• When the "CHAP Password" does not satisfy the input conditions
• When the "Confirm CHAP Password" does not satisfy the input
conditions
• When the "CHAP Password" and the "Confirm CHAP Password"
do not match
• When only one of the "CHAP User ID" or the "CHAP Password"
has been specified
An error screen appears in the following conditions:
• When the "Host Group Name" matches with an existing host
group name (Host group names cannot overlap with any other
host group names, irrespective of the interface types.)
• When the total number of host groups has exceeded the
maximum number for the device
• When the total number of hosts has exceeded the maximum
number for the device
• When no hosts are registered in a host group, or when nine or
more hosts are registered in a host group
• When the specified host has already been registered in another
host group
• When several iSCSI hosts with the same "IP Address" and "iSCSI
Name" have been configured
• When several iSCSI hosts are specified with the same "iSCSI
Name" and no IP addresses are specified
To Next Page
Loading...