Fujitsu Eternus web GUI - Page 305

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
305
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
(3)Repeat Step (1) and Step (2) to set more iSCSI hosts.
(4)After adding the iSCSI host is complete, click the [Add] button.
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the "iSCSI Name" does not satisfy the input conditions
• When the "iSCSI Name" field has not been entered
• When the "IP Address" does not satisfy the input conditions
• When the "IP Address" is not Class A, B, or C
• When the "Alias Name" does not satisfy the input conditions
• When the "Alias Name" overlaps the existing Alias name
• When the "CHAP User ID" does not satisfy the input
conditions
• When the "CHAP Password" does not satisfy the input
conditions
• When the "Confirm CHAP Password" does not satisfy the
input conditions
• When the "CHAP Password" and the "Confirm CHAP
Password" do not match
• When only one of the "CHAP User ID" or the "CHAP
Password" has been specified