Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
317
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Click the [OK] button.
→ Modification of the FC host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
9.2.2.7 Modify iSCSI Host Group
This function performs the following modifications to the existing iSCSI host group.
• Host Group Name
• Host Response
• Number of Hosts (Add and delete member hosts in a host group)
An error screen appears in the following conditions:
• When the "Host Group Name" does not satisfy the input
conditions
• When the "Host Group Name" has not been specified
An error screen appears in the following conditions:
• When the "Host Group Name" overlaps with an existing host
group name (Host group names cannot overlap with any other
host group names, irrespective of the interface types.)
• When the total number of hosts has exceeded the maximum
number for the device
• When no hosts are registered in a host group, or when nine or
more hosts are registered in a host group
• When the specified host has already been registered in another
host group
• The specified WWN has already been registered in the
ETERNUS DX Disk storage system
• When the several FC hosts with the same WWNs have been
registered
• When the specified host response does not exist in the
ETERNUS DX Disk storage system
To Next Page
Loading...