Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
316
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
(2)Manually specify the WWN of the host to be added, and click the [OK] button.
- WWN
Enter the WWN for the FC host.
The following input conditions apply:
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 characters
• "0" used as the first letter, and "F (f)" or "0" used in entire 16 characters are not
allowed.
→ Return to the [Manual Input] screen.
(3)Repeat Step (1) and Step (2) to set more WWNs.
(4)After adding or deleting FC hosts is complete, click the [Modify] button.
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the "WWN" does not satisfy the input conditions
• When the "WWN" has not been specified
To Next Page
Loading...