Fujitsu Eternus web GUI - Page 326

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
326
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Enter a new host group name, or re-select a host response to be assigned to the
host group.
● Host Group Setting
• SAS Host Group Name
Specify the host group name.
An existing host group name cannot be specified. Refer to "Naming conventions for
adding SAS hosts" (page 620) for details.
The following input conditions apply:
- 1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
• Host Response
Select a host response to be assigned to a host group.
The host response list created in the ETERNUS DX Disk storage system is displayed.
- Windows EMPD (*1)
- Linux EMPD (*1)
- Solaris EMPD (*1)
- Solaris MPxIO
- HP-UX
- AIX EMPD (*1)
- AIX VxVM
- AIX Single Path
- VS850/SVC
- Host responses created in the ETERNUS DX Disk storage system
- Others
*1: EMPD: ETERNUS Multipath Driver