Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
327
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3 Add or delete a host in a host group in the following procedures.
■ Add or delete a host by clicking the [Registered And Now Connected] tab
(1)Add or delete SAS hosts, and click the [Modify] button.
- Checkbox to select hosts
Select the corresponding host checkbox in the SAS host list, to add a host.
Clear the corresponding host checkbox in the SAS host list, to delete a host.
→ A confirmation screen appears.
■ Add a host by clicking the [Manual Input] tab
(1)Click the [Add] button to display the [Add SAS Address] screen.
→ The [Add SAS Host] screen appears.
To Next Page
Loading...