Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
328
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
(2)Manually specify the SAS address of the host to be added, and click the [OK] button.
- SAS Address
Specify the SAS address of the SAS host.
The following input conditions apply:
• Hexadecimal numbers
• 16 characters
→ Return to the [Manual Input] screen.
(3)Repeat Step (1) and Step (2) to set more SAS addresses.
(4)After adding or deleting SAS hosts is complete, click the [Modify] button.
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the "SAS Address" does not satisfy the input conditions
• When the "SAS Address" field has not been specified
To Next Page
Loading...