Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
332
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
9.2.2.11 Delete SAS Host
This function deletes a SAS host.
When a SAS host belongs to a host group, the SAS host can be deleted, irrespective of its host
affinity settings.
The procedure to delete a SAS host is as follows:
1 Select the SAS host to be deleted (multiple selections can be made) and click
[Delete SAS Host] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Deletion of the SAS host starts.
3 Click the [Done] button to return to the [Host] screen.
• Not all of the hosts can be deleted from a host group.
• When a SAS host does not belong to a host group, the SAS host, of
which host affinity settings have been configured, cannot de deleted.
When a host in the host group for which the host affinity settings are
already configured is deleted, the path from the host to the port is also
deleted.
An error screen appears in the following conditions:
• When the selected SAS host is the last host in a host port group
• When the selected SAS host does not belong to any host port
group and the host affinity setting has been configured for the
target FC host
• When the selected SAS host does not exist
To Next Page
Loading...