Fujitsu Eternus web GUI - Page 34

Chapter 3 Initial Setup
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
34
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3 Proceed to [Set Storage System Name].
3-1 Specify the following items, and click the [Next] button.
- Name
- Installation Location
- Administrator
- Description
→ A confirmation screen appears.
3-2 Click the [OK] button.
→ Setting of the storage system name starts.
3-3 Click the [Done] button.
• If logging in for the first time, be sure to set the name of the
ETERNUS DX Disk storage system.
• If not logging in for the first time, click the [Skip] button to
proceed to the next screen without setting.