Fujitsu Eternus web GUI - Page 35

Chapter 3 Initial Setup
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
35
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Proceed to [Set Date and Time].
4-1 Specify the following items, and click the [Next] button.
- Date/Time Information
- Time Zone
- Daylight Saving Time
- NTP Service
→ A confirmation screen appears.
4-2 Click the [OK] button.
→ Setting of the Date/time starts.
4-3 Click the [Done] button.
Click the [Skip] button to proceed to the next screen without
setting.