Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
352
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ Modification of the port group starts.
• If the port group's affinity mode is "On" (the affinity mode of all
the selected ports is "On"), the port, of which affinity mode is
"Off", cannot be selected.
• If the port group's affinity mode is "Off" (the affinity mode of all
the selected ports is "Off"), the port, of which affinity mode is
"On", cannot be selected.
• Up to eight ports can be selected.
An error screen appears in the following conditions:
• When the port group name does not satisfy the input conditions
• When the port group name has not been entered
To Next Page
Loading...