Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
378
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
5 Click the [OK] button.
→ LUN group creation starts.
6 Click the [Done] button to return to the [LUN Group] screen.
9.2.4.2 Delete LUN Group
This function deletes LUN groups.
The procedure to delete a LUN group is as follows:
1 Select the LUN group that is to be deleted, and click [Delete LUN Group] in
[Action].
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the LUN group name, which you entered in the "Name"
field, has the same name as an existing LUN group
• When the LUN group name, which you entered in the "Name"
field, does not satisfy the input conditions
• When the "Name" field is not entered
• When the total number of LUN groups has reached the maximum
number of devices
• When the selected volume has already been in use in another
LUN group
• When the selected volume does not exist
The LUN groups, which are being used in the Host Affinity settings, cannot
be deleted.
To Next Page
Loading...