Fujitsu Eternus web GUI - Page 379

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
379
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Click the [OK] button.
→ LUN group deletion starts.
3 Click the [Done] button to return to the [LUN Group] screen.
End of procedure
9.2.4.3 Modify LUN Group
This function modifies LUN groups.
The procedure to modify a LUN group is as follows:
Procedure
1 Select the LUN group that is to be changed, and click [Modify LUN Group] in
[Action].
An error screen appears in the following conditions:
• When the selected LUN group is being used in the Host Affinity
settings
• When the selected LUN group does not exist
• When changing or deleting the volume allocation in a running LUN
group, stop access from the associated host.
• When adding LUNs or volume allocation to a running LUN group,
stopping access from the associated host is not necessary.
• Only the volumes with "Standard", "SDV", or "TPV" volume types can be
registered in the LUN group. "SDPV" volumes cannot be registered in
the LUN group.