Fujitsu Eternus web GUI - Page 380

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
380
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Change the LUN group name and its volume allocation information, and click the
[Modify] button.
• Name
Modify the LUN group name.
An existing LUN group name cannot be specified.
The following input conditions apply:
- 1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the LUN group name, which you entered in the "Name"
field, has the same name as an existing LUN group
• When the LUN group name, which you entered in the "Name"
field, does not satisfy the input conditions
• When the "Name" field is not entered
• When the selected volume has already been in use in another
LUN group
• When the selected volume does not exist
The volume allocation information can be edited while performing the
procedure in "9.2.4.1 Add LUN Group" (page 375)
.
• To add the LUN and the volume allocation, click the [Add] button.
• To delete the LUN and the volume allocation information, click the
[Delete] button for the allocation information to be deleted.
• To change the LUN and the volume allocation information, delete
the allocation information to be changed. Change the allocation
volume, and add it to the LUN group again.