Fujitsu Eternus web GUI - Page 38

Chapter 3 Initial Setup
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
38
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
7 Proceed to [Register Copy License].
7-1 Specify the following items, and click the [Next] button.
- Registration Method
- License Key
→ A confirmation screen appears.
7-2 Click the [OK] button.
→ The Advanced Copy license registration is executed.
7-3 Click the [Done] button.
• If a Advanced Copy license (trial license) is already registered,
the paid license can be registered. Enter the license key.
• If the Advanced Copy license key (paid license) is already
registered, proceed to [Register SED Authentication Key].
• Click the [Skip] button to proceed to the next screen without
setting.