Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
43
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The procedure to perform Initial Setup 2 is as follows:
1 Click [Start Initial Setup] in [Action].
2 Click the [Next] button.
→ Initial Setup restarts.
• When logging in again after Initial Setup 1 is complete, the [Initial
Setup 2] screen appears.
• If all of the settings of Initial Setup 2 are not performed, click the
[All Skip] button to exit the Initial Setup wizard.
To Next Page
Loading...