Fujitsu Eternus web GUI - Page 44

Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
44
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3 Proceed to [Set SNMP Agent Basic].
3-1 Specify the following items, and click the [Next] button.
- SNMP Function
- LAN Port used for SNMP
- Authentication Failure
- Engine ID
→ A confirmation screen appears.
3-2 Click the [OK] button.
→ Setting of the SNMP Agent basic starts.
3-3 Click the [Done] button.
Click the [Skip] button to proceed to the next screen without
setting.