Fujitsu Eternus web GUI - Page 474

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
474
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
5 After adding or editing the user information, click the [Set] button.
→ A confirmation screen appears.
6 Click the [OK] button.
→ Setting of the SNMP Agent user starts.
7 Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.7 Setup SNMP Agent Community
This function sets up the SNMP Agent Community.
The Community is a range of available networks for SNMP.
The setting value is used as the password for SNMP Agent Manager to access the SNMP Agent
of the ETERNUS DX Disk storage system.
The SNMP Agent only accepts a request from SNMP Agent Manager if the specified community
names for SNMP Agent Manager and SNMP Agent are the same.
Up to ten communities can be specified for each ETERNUS DX Disk storage system.
• If the "SNMP Function" is disabled, the [Setup SNMP Agent Manager]
function cannot be used.
• The community name that is used in the settings in "11.2.3.8 Setup
SNMP Agent Trap" (page 477) cannot be changed or deleted.