Fujitsu Eternus web GUI - Page 473

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
473
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• Authentication Password
When enabling authentication, enter the authentication password.
The following input conditions apply:
- 8 - 64 alphanumeric characters and symbols
- "! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+
(plus)", "- (hyphen)", "* (asterisk)" and "/ (slash)" can be used
- Spaces
• Retype Authentication Password
When enabling authentication, enter the authentication password again.
• Encryption
Select whether to enable or disable the encryption.
If the "Authentication" setting is "Disable", the encryption setting cannot be selected.
• Encryption Password
When enabling encryption, enter the encryption password.
The following input conditions apply:
- 8 - 64 alphanumeric characters and symbols
- "! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+
(plus)", "- (hyphen)", "* (asterisk)" and "/ (slash)" can be used
- Spaces
• Retype Encryption Password
When enabling the encryption, enter the encryption password again.
→ Return to the original screen.
4 Repeat Step 2 and Step 3 to configure multiple users.