Fujitsu Eternus web GUI - Page 50

Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
50
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
7-3 Repeat Step 7-1 and Step 7-2 to configure multiple communities.
7-4 When the setting of the community is complete, click the [Next] button.
→ A confirmation screen appears.
7-5 Click the [OK] button.
→ Setting of the SNMP Agent Community starts.
7-6 Click the [Done] button.
8 Proceed to [Set SNMP Agent Trap].
8-1 Click the [Add] button.
8-2 Specify the following items, and click the [OK] button.
- Manager No.
- SNMP Version
- Community Name
- User Name
- Port No.
Click the [Skip] button to proceed to the next screen without
setting.