Fujitsu Eternus web GUI - Page 48

Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
48
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
6-2 Specify the following items, and click the [OK] button.
- User Name
- MIB View Setting
- Authentication
- Authentication Method
- Authentication Password
- Retype Authentication Password
- Encryption
- Encryption Password
- Retype Encryption Password
→ Return to the original screen.
6-3 Repeat Step 6-1 and Step 6-2 to configure information for multiple users.
6-4 When the setting of the user information is complete, click the [Next] button.
→ A confirmation screen appears.
6-5 Click the [OK] button.
→ Setting of the SNMP Agent User starts.
6-6 Click the [Done] button.
7 Proceed to [Set SNMP Agent Community].
7-1 Click the [Add] button.
The [Set SNMP Agent User] function must be set when using
SNMPv3 in SNMP communication between the SNMP Agent and
SNMP Agent Manager.
Click the [Skip] button to proceed to the next screen without
setting.