Fujitsu Eternus web GUI - Page 514

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
514
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• REMCS Center (*1)
• Fujitsu America
• Australia
• Brazil
• Hong-Kong
• China
• Indonesia
• Korea
• Malaysia
• Philippine
• Singapore
• Taiwan
• Thailand
• Vietnam
• Individual support in Hawaii
• Direct Input Setting
*1: Japan
- HTTP Server
If "Direct Input Setting" is selected in the "REMCS Center" field, enter the IP
address or the domain name of the remote HTTP server.
The following input condition applies:
• 1 - 63 alphanumeric characters and symbols
- Port No.
Enter the port number of the HTTP server.
The following input condition applies:
• Numeric characters ("0" - "65535")
- Receiver Mail Address
When "Direct Input Setting" is selected, enter the E-mail address of the report desti-
nation for the REMCS operation.
The following input condition applies:
• 1 - 63 alphanumeric characters and symbols
● Detailed Configuration Information
● Time Information
Refer to Step 2 (page 511) for setting items.
Refer to Step 2 (page 511) for setting items.