Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
544
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Repeat Step 2 and Step 3 to configure multiple events.
5 After adding all the events, click the [Set] button.
→ A confirmation screen appears.
• "Specific days" is selected for the event type when "One day only"
is selected for the period, and the start time is later than the end
time
• "Specific week" is selected for the event type when the start day
and the end day are the same, and the start time and the end
time are the same
• "Specific week" is selected for the event type when the start day
is later than the end day
• "Specific week" is selected for the event type when the start day
and the end day are the same, and start time is later than the end
time
• The period is set to include Sunday
• The period is 1 week or longer (the end date is set to "7 days"
when the end time is later than the start time)
• When deleting the added event, select the event, and click the
[Delete] button.
• When changing the added event, select the event, and click the
[Edit] button.
In the following conditions, an error screen appears:
• "Schedule Name" has not been entered
• "Schedule Name" matches with an existing schedule name
To Next Page
Loading...