Fujitsu Eternus web GUI - Page 558

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
558
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
REMCS Defaults
The REMCS recommended pattern of event notification is as follows. For the notification meth-
ods indicated with "*", ON/OFF setting has been changed from the system default.
Level Event Notification method
Host Sense
Key Code
Qualifier
SNMP
Trap
E-Mail syslog REMCS
Error
Parts Error Selected Selected Selected Cleared Selected
(fixed)
Disk Error Any Time Cleared * Selected Selected Cleared Selected
(fixed)
when
HS<0
Cleared Selected
*
Selected
*
Cleared –
Temperature Error Selected Selected Selected Cleared Selected
(fixed)
End of battery life Selected Selected Selected Cleared Selected
(fixed)
Rebuild/Copyback w/
redundant
Cleared * – – – –
Rebuild/
Copyback
w/o
redundant
Any Time Selected – – – –
when
HS<0
Selected * – – – –
Complete rebuild Selected Selected Selected Cleared Selected
(fixed)
Bad data Selected Selected Selected Cleared Selected
(fixed)
Pinned data Selected Selected Selected Cleared Selected
(fixed)
Not ready Selected Selected Selected Cleared Selected
(fixed)
Remote Path Error Selected Selected Selected Cleared Selected
REC Buffer Halt (Path
Error)
– Selected Selected Cleared Selected
REC Buffer Halt
(Overload)
– Selected Selected Cleared Selected
REC Buffer Halt (Other
Error)
– Selected Selected Cleared Selected
Thin Provisioning Pool
Rate
– Selected Selected Cleared –